RECORDS / TERMS / THE NEXT APPOINTMENT

How a Car Cooling System Works

See what the water pump, thermostat, radiator, fan and cap each do to move coolant and hold engine temperature in a safe working range.

3 min read1 viewsHow a Car Cooling System Works
— · 0 votes
Contents
  1. The coolant loop through the engine
  2. Parts that control engine temperature
  3. How the heater and gauge fit in
  4. Car cooling system questions
  5. What happens when a car cooling system fails?
  6. How often should coolant be changed?
  7. Can I check the coolant level myself?
  8. What happens if the thermostat gets stuck?

A car cooling system circulates coolant through the engine and sheds the absorbed heat at the radiator. Knowing how car cooling systems work helps you read a temperature gauge and spot a failing part early. Below, coolant is followed through each part, from the water pump and thermostat to the cooling fan.

The coolant loop through the engine

The water pump pushes coolant through passages in the engine block and cylinder head to absorb heat. Hot coolant then travels to the radiator, a core of thin tubes and metal fins. Air passing over those fins carries the heat away before the cooled liquid returns to the pump. Coolant itself blends water with antifreeze to resist freezing, boiling and corrosion inside the engine.

Parts that control engine temperature

The thermostat is a heat-sensitive valve that keeps coolant inside the engine until it reaches working temperature. Once the engine warms up, the valve opens to let coolant flow to the radiator. The radiator cap holds the system under pressure, which raises the boiling point of the coolant. A cooling fan pulls air through the radiator when the car is stopped or moving slowly.

How the heater and gauge fit in

The heater core is a small radiator behind the dashboard that warms the cabin with engine coolant. Turning the heater to hot sends some of that coolant heat into the air blowing inside. A sensor in the coolant passages reports engine temperature to the gauge or warning light on the dash. The normal needle position depends on the vehicle, so the owner's manual is the reference for your car.

Car cooling system questions

What happens when a car cooling system fails?

A failing car cooling system lets engine temperature climb until the engine overheats. Overheating can warp the cylinder head, damage the head gasket and seize internal engine parts. If the gauge reaches the hot zone, stop safely and switch the engine off. Opening a hot radiator cap is dangerous, since pressurized coolant can spray out and scald skin.

How often should coolant be changed?

Coolant change intervals depend on the coolant type and the vehicle maker's service schedule. Old coolant loses its corrosion protection, which can let rust and scale build up inside. Writing down the date and mileage of each coolant service makes the next one easy to plan.

Can I check the coolant level myself?

Yes, you can check the coolant level at the translucent overflow reservoir under the hood. Do it with the engine cold, and look for the level between the marked lines. Top up only with the coolant type listed in the owner's manual for your vehicle. A level that keeps dropping points to a leak that a trained technician should trace.

What happens if the thermostat gets stuck?

A thermostat stuck closed blocks coolant from reaching the radiator, so the engine overheats. A thermostat stuck open sends coolant to the radiator too early, keeping the engine below working temperature. A cool-running engine can give weak cabin heat and a gauge that reads lower than normal. Replacing a thermostat means draining coolant and removing trapped air from the system afterward.

Read next

Latest articles