RECORDS / TERMS / THE NEXT APPOINTMENT

Reading Motorcycle Tire Size Numbers

Learn how to read motorcycle tire size numbers, from width and aspect ratio to rim diameter, and understand the load index and speed rating on the sidewall.

3 min read0 views
— · 0 votes
Contents
  1. Breaking down the size string
  2. Why the aspect ratio matters
  3. Load index and speed rating
  4. Motorcycle tire size questions
  5. How do you read motorcycle tire size numbers?
  6. What do dirt bike tire size numbers mean?
  7. What is the difference between front and rear motorcycle tire sizes?
  8. Where do I find the tire size on a motorcycle?

Reading motorcycle tire size numbers means decoding a short string on the sidewall that gives the tire width, its aspect ratio and the wheel rim diameter it fits. The same string also carries a load index and a speed rating that describe how much weight and speed the tire is built for. This page explains each part of the code, how front and rear motorcycle tire sizes differ, and how the numbers connect to the wheel a tire must sit on.

Breaking down the size string

A motorcycle tire size markings string such as 120/70-17 divides into three parts: width, aspect ratio and rim diameter. The first number is the nominal section width in millimeters, measured across the widest part of the inflated tire. The number after the slash is the aspect ratio, the sidewall height as a percentage of that width. The final number is the rim diameter in inches, so the tire must match the wheel it is mounted on.

Why the aspect ratio matters

The aspect ratio changes the tire's profile even when the width stays the same. A lower ratio gives a shorter sidewall and a flatter, wider-looking profile, while a higher ratio gives a taller sidewall and a rounder shape. Because the sidewall height is a percentage of width, the same ratio number produces a different height on a wider tire. Matching the original ratio keeps the tire's overall diameter close to the design of the motorcycle.

Load index and speed rating

After the size, a letter or letter code states the load index and speed rating of the tire. The load index is a code for the maximum weight the tire can carry, and the speed rating is a code for the top speed it is approved for. These markings matter when you compare a replacement tire with the one the motorcycle was built around. A tire with a lower load index or speed rating than the original may not suit the bike's weight or use.

Motorcycle tire size questions

How do you read motorcycle tire size numbers?

You read motorcycle tire size numbers from left to right as width, aspect ratio and rim diameter. In a code like 120/70-17, the 120 is the width in millimeters and the 70 is the sidewall height as a percentage of that width. The 17 is the rim diameter in inches, which must match the wheel. Any letters after the size give the load index and speed rating.

What do dirt bike tire size numbers mean?

Dirt bike tire size numbers follow the same width, aspect ratio and rim diameter pattern, though off-road sizes often carry a higher aspect ratio. A taller sidewall suits low pressures and rough ground, so dirt bike sizes can look different from street sizes. The rim diameter still has to match the wheel exactly. Check the load index and speed rating as well when you replace a dirt bike tire.

What is the difference between front and rear motorcycle tire sizes?

Front and rear motorcycle tire sizes differ because the two tires do different jobs. A front tire is often narrower and carries a different profile to support steering, while a rear tire is wider to put down drive force. The front and rear tire markings should be read separately, and each tire should match its own rim. Never assume a size that fits one wheel will fit the other.

Where do I find the tire size on a motorcycle?

The motorcycle tire sidewall carries the size code along with the load index and speed rating. Look for the string of numbers and letters molded into the rubber, often near the rim on one side. The same sidewall may show the tire's construction and the direction of rotation. Write the size down when you note service details, so a replacement is easy to match later.

Latest articles