RECORDS / TERMS / THE NEXT APPOINTMENT

Rear Windshield Wiper Size Lookup

A practical guide to looking up your rear wiper blade length, checking the arm fitting, and replacing the hatch wiper blade without damaging the arm.

8 min read1 viewsRear Windshield Wiper Size Lookup
— · 0 votes
Contents
  1. Why the rear wiper size differs from the front
  2. Gather the details before you search
  3. Run the lookup by vehicle, not by blade
  4. Check the arm fitting and the blade length
  5. Measure the old blade when the lookup is unclear
  6. Replace the rear blade with care
  7. Keep a record of rear wiper service
  8. Match the size to the weather and use
  9. Rear Wiper Size Questions
  10. Where do I find the rear windshield wiper size for my vehicle?
  11. Can I use a front wiper blade on the rear window?
  12. What if the listed rear wiper blade length does not match my old blade?
  13. Does the rear wiper arm fitting matter as much as the length?
  14. How do I know when the rear wiper blade needs replacing?

A rear windshield wiper size lookup starts with your vehicle's exact model, body style and production year, because the hatch glass and arm differ between versions. You then confirm the blade length and the arm fitting before buying. Recording the size and the replacement date in your service notes makes the next lookup faster.

  • Look up the rear wiper blade length by the exact model, body style and year, not by the brand alone.
  • Confirm the arm fitting type as well as the length, since two blades of equal length can attach differently.
  • Measure the old blade or the arm sweep when the lookup result is unclear.
  • Write the blade size and the replacement date into your service record.
  • Check that the new blade clears the spoiler, the glass curve and the washer nozzle.

Why the rear wiper size differs from the front

The rear windshield wiper on a hatchback, wagon or SUV is a separate part from the front pair. Its blade is shorter, and its arm uses a fitting designed for the hatch glass rather than the windshield. A front wiper size lookup will not give you the rear number.

Rear glass is smaller and more curved than a windshield, so the blade sweeps a tighter arc. The arm is often shorter and lighter to match that smaller load. These differences mean the rear wiper blade length and fitting must be matched to the vehicle's rear assembly.

Some vehicles hide the rear wiper under a spoiler or park it against the glass edge. That layout changes the arm shape and the space the blade needs. Note these details when you look up a hatch wiper size.

Gather the details before you search

A reliable rear windshield wiper size lookup needs the vehicle identification number, the model year and the body style. Trim level can also change the rear wiper, especially on vehicles sold with and without a rear spoiler. Have the registration or the door jamb label in front of you.

Write the model year as the manufacturer states it, not the year of first registration. A vehicle built late in a calendar year may belong to the next model year. Getting this right prevents a size lookup from returning the wrong blade.

The body style matters because the same nameplate can be sold as a hatchback, a wagon or a small SUV. Each version can carry a different rear glass and arm. Record the body style exactly as it appears on the vehicle.

Run the lookup by vehicle, not by blade

Start the lookup with the vehicle details, then narrow to the rear position. Many parts catalogs list front and rear blades together, so confirm that you are reading the rear row. The result should give a rear wiper blade length and a fitting reference.

A fitting reference describes how the blade connects to the arm, such as a hook, a pin or a bayonet. Two blades of the same length can carry different fittings. Treat the fitting reference as part of the answer, not an extra detail.

When the catalog offers several results for one vehicle, the body style or the production split is the reason. Compare the details against your vehicle before you choose. A parts counter can confirm the match from the vehicle identification number.

Check the arm fitting and the blade length

The rear wiper arm fitting decides whether a blade will lock onto the arm securely. Compare the connector shape and width with the old blade before purchase. A loose fit can let the blade lift or detach during use.

Blade length affects how much glass is cleared and whether the blade fouls the spoiler or the glass edge. Measure the old blade from end to end, including the connector, if the listing is unclear. Compare that measurement with the catalog figure.

Some rear wipers use a specific arm type with a locking tab. Others use a simple push-fit connector. Photograph the arm end when you ask for help, so the fitting can be identified without guesswork.

Measure the old blade when the lookup is unclear

Measuring the old rear wiper blade gives a reliable fallback when the catalog result is ambiguous. Lay the blade flat and measure from tip to tip, ignoring any curve in the rubber. Write the figure down before you discard the old blade.

Measure the arm sweep as a second check, from the pivot to the blade tip at rest. If a replacement blade is much longer than the original, it may strike the glass edge or the spoiler. Stay close to the original figure unless the vehicle maker states otherwise.

Keep the old blade until the new one is fitted and tested. The old part shows the original length and fitting if the new blade does not seat properly. Store it flat so the rubber does not take a set.

Replace the rear blade with care

Lift the rear wiper arm away from the glass only as far as its spring allows. Many rear arms are designed to fold out to a service position and no further. Forcing the arm can crack the glass or damage the pivot.

Release the old blade from the connector, then fit the new blade until it clicks or locks. Follow the blade maker's fitting instructions for your arm type. A blade that does not lock should not be used.

Lower the arm gently onto the glass and test the wipe with the washer. Watch for missed areas, lifting at the ends and contact with the spoiler. If the blade strikes anything or leaves streaks, stop and check the fitting again.

  • Park on level ground and switch off the ignition before you start.
  • Lift the arm only to its service position and support it if needed.
  • Release the old blade from the connector without twisting the arm.
  • Fit the new blade until the connector locks.
  • Lower the arm gently and test the wipe with the washer.
  • Record the blade size and the replacement date in your service notes.

Keep a record of rear wiper service

A service record for the rear wiper holds the blade length, the fitting type and the date of replacement. These details make the next rear wiper blade replacement faster and cheaper to plan. They also show whether a blade was changed recently.

Note the symptoms that led to the change, such as streaking, chatter or a torn edge. Pairing a symptom with the fix helps you judge the next blade earlier. Keep the record with your other vehicle service notes.

Group wiper service with washer fluid top-ups and glass cleaning in the same log. When the rear blade is addressed alongside these tasks, the record stays complete. The operating cost of wiper care then sits in one place.

Match the size to the weather and use

The right rear wiper blade size is the one the vehicle's arm and glass were built for. A longer blade clears more glass but may foul trim or the spoiler. Stay with the listed size unless the vehicle maker gives a different figure.

Driving in snow, dust or salt spray loads the rear blade heavily, and a worn blade clears less glass. Check the blade edge and the arm tension at each service. Replace a blade that streaks or leaves gaps.

Store spare blades flat and out of direct sun so the rubber stays supple. Note the part number and the fitting in the record, so a future lookup needs no guesswork. A labeled spare is faster to fit when the old blade fails.

Rear Wiper Size Questions

Where do I find the rear windshield wiper size for my vehicle?

The rear windshield wiper size comes from a lookup by the exact model, model year and body style. Parts catalogs that sort by vehicle list the rear blade length and the arm fitting. Confirm both figures before you buy.

Can I use a front wiper blade on the rear window?

No, a front wiper blade is made for the windshield arm and is often the wrong length for the rear. Rear wiper arms use their own fittings and shorter blades. Fit a blade listed for the rear position.

What if the listed rear wiper blade length does not match my old blade?

Measure the old blade tip to tip and compare it with the listing before you buy. A small difference may reflect how the length is measured with the connector. If the gap is larger, check the body style and model year again.

Does the rear wiper arm fitting matter as much as the length?

Yes, the rear wiper arm fitting decides whether the blade locks onto the arm safely. A blade of the correct length with the wrong connector will not seat properly. Match the fitting reference to the arm before fitting the blade.

How do I know when the rear wiper blade needs replacing?

Replace the rear wiper blade when it streaks, chatters or leaves unwiped patches on the glass. A torn or hardened edge is a clear sign the rubber has aged. Record the replacement date so you can compare it with the next set of symptoms.

Read next

Latest articles