Spare Tire Installation and Cost
How to install a spare tire safely, how to stow it again, and what shapes spare tire cost, from the type of spare to the work a shop performs.
Contents
- Steps to mount the spare wheel
- Stowing the flat tire and spare again
- What shapes spare tire cost
- Questions about spare tire installation
- How do I put a spare tire on my car?
- How do I use a car jack for a spare tire change?
- What does spare tire replacement cost depend on?
- Can roadside assistance change a spare tire for me?
Spare tire installation means mounting your temporary wheel on the car with a jack and wheel wrench, tightening the lug nuts in a pattern, and then stowing the flat tire correctly. The page covers the change spare tire steps in order, how to put a spare tire back in the trunk or under the car, and what drives spare tire cost. It also explains when a roadside assistance call or a trained specialist is the safer choice.
Steps to mount the spare wheel
Spare tire instructions begin with parking on level ground, setting the parking brake, and turning on hazard lights so other drivers see you. Loosen the lug nuts slightly before the jack lifts the car, because a raised wheel can spin freely. Raise the vehicle until the flat tire clears the ground, then remove the lug nuts and pull the wheel off. Mount the spare tire, start the lug nuts by hand, lower the car, and tighten them in a star pattern with the wheel wrench.
Stowing the flat tire and spare again
How to put a spare tire back in the trunk depends on the spare tire stowage design of your vehicle. Many cars hold the spare under a floor panel in the trunk, held by a threaded bolt or a strap that you turn or clip back into place. Some trucks and SUVs carry the wheel under the rear of the body on a hoist cable, and the spare tire removal and refit happen through a crank or winch. Check that the wheel sits flat in its well and that the retaining hardware is snug before you close the trunk or lower the carrier.
What shapes spare tire cost
Spare tire cost depends on the type of spare, the wheel size, and whether you buy a full-size wheel or a temporary spare. A temporary spare is a narrow wheel meant for limited use, while a full-size spare matches your road wheels and costs more. Tire replacement cost also reflects the tire brand, the tire size, and the labor rate of the shop that mounts and balances it. Installation labor and any mounting hardware or spare tire kit parts add to the total, so ask for an itemized quote.
Questions about spare tire installation
How do I put a spare tire on my car?
Putting a spare tire on your car takes a jack, a wheel wrench, and a level parking spot. Loosen the lug nuts a turn before lifting, raise the car until the flat clears the ground, and swap the wheels. Tighten the lug nuts in a star pattern after lowering the car, and check the lug nut torque with a torque wrench when you can.
How do I use a car jack for a spare tire change?
A car jack lifts one corner of the vehicle at the jacking point marked in your owner's manual. Place the jack on firm, level ground under that point and raise it slowly until the tire clears the surface. Never put any part of your body under a car held only by a jack, and use jack stands when the vehicle must stay raised.
What does spare tire replacement cost depend on?
Spare tire replacement cost depends on the wheel size, the type of spare, the tire brand, and the labor charged for mounting and balancing. A temporary spare costs less than a full-size wheel in the same size. Ask the shop for a written quote that separates the tire, the mounting, and any hardware.
Can roadside assistance change a spare tire for me?
Roadside assistance can change a spare tire when you cannot or should not do the job yourself. Call for help on a busy road, at night, or when the vehicle sits on a slope or soft ground. A trained specialist can also handle a wheel that is stuck or lug nuts that will not loosen.