Sunroof Drain Tube and Hose Size by Vehicle
How to find the right sunroof drain hose size for your car, measure the old tube, and match a replacement fitting on models like the G37, Q50 and 2000 Accord.
Contents
- Why drain tube size changes by vehicle
- Measure inner and outer diameter with calipers
- Confirm the length along the routing
- Match a replacement drain hose fitting
- Finding the size for a specific model
- What to note in your service record
- When to hand the job to a specialist
- Questions about sunroof drain hose size
- What size is a sunroof drain hose?
- What size is the sunroof drain tube on a 2000 Honda Accord?
- What size is the sunroof drain hose on an Infiniti G37?
- What size is the sunroof drain tube on an Infiniti Q50?
- How do I measure a sunroof drain tube?
Sunroof drain tube size is not a single universal number, so the right hose is the one that matches your vehicle's original tube in inner diameter, outer diameter and length. A practical approach is to measure the old hose with calipers and match a replacement fitting to those dimensions. Model-specific sizes for cars such as the Infiniti G37 and Q50 and the 2000 Honda Accord are best confirmed against the part listing for that vehicle.
- Sunroof drain hose size varies by vehicle, so measure the tube before buying a replacement.
- Inner diameter and outer diameter both matter when matching a drain hose fitting.
- Calipers give a more reliable reading than holding a tape against a soft tube.
- Tube length depends on the routing from the sunroof tray to the drain exit point.
- A parts listing keyed to the vehicle is the safest confirmation of the correct hose.
Why drain tube size changes by vehicle
Sunroof drain tube size is set by the sunroof assembly and the body routing on each vehicle, so no single hose fits every car. The tray outlet, the pillar routing and the drain exit all influence the diameter and length a hose needs.
A hose that is too small in inner diameter restricts water flow and can back up at the tray. A hose that is too large may not seal at the fitting and can leak inside the trim.
Treat the original hose as the reference part whenever it is still intact. Record its dimensions before removal so a replacement can be matched without guesswork.
Measure inner and outer diameter with calipers
Measuring drain tube with calipers gives the two numbers that decide fit: the inner diameter and the outer diameter. Calipers read a soft tube more precisely than a ruler pressed against the opening.
Measure the inner diameter at the cut end, away from any stretched or crushed section. Measure the outer diameter at the same point so the pair of readings describes one clean cross-section.
Take each reading more than once and note the values in your service record. A stable pair of numbers is easier to compare with a parts listing than a single rough estimate.
Confirm the length along the routing
Sunroof drain tube length depends on the path from the sunroof tray to the drain exit, not on the model name alone. Two cars of the same model can differ if the routing was changed during a repair.
Run a flexible wire or the old hose along the routing and mark the path length. Add a small allowance for bends and for the section that sits over the fitting.
Record the measured length next to the diameter readings. The length and the diameter together describe the hose you need to order.
Match a replacement drain hose fitting
A replacement drain hose fitting must seal at the tray outlet and at the drain exit, so match both ends rather than the middle of the hose. A fitting that is close in size but wrong at the shoulder can still leak.
Compare the new fitting to the old one at the sealing surface, the shoulder and the hose barb. Small differences at the barb change how tightly the hose grips.
When the original fitting is damaged or missing, use the vehicle's parts listing to identify the correct item. A trained technician can confirm the fit if the routing has been modified.
Finding the size for a specific model
Model-specific sizes are best read from the parts listing for that vehicle rather than from a general chart. The Infiniti G37 sunroof drain and the Infiniti Q50 sunroof drain each use their own routing and fittings.
For the 2000 Honda Accord sunroof drain, the original hose dimensions are the reference. A parts listing keyed to the model and year confirms the tube and any fitting that comes with it.
Where a listing does not state a dimension, measure the old hose and compare. Record the confirmed values so the next service is faster.
What to note in your service record
A service record for a sunroof drain job should hold the measured inner diameter, outer diameter and length for each corner of the car. These details make the next replacement a direct match.
Note the part number, the date of the work and any fitting that was changed at the same time. Linking the hose to the part number keeps the record useful years later.
Keep the dimensions with the vehicle's other service notes so operating costs and repairs stay in one place. A clear record reduces repeat purchases of the wrong hose.
When to hand the job to a specialist
Replacing a sunroof drain hose can require removing headliner trim and pillar covers, and that work can damage airbags or wiring if handled incorrectly. Where the routing passes near safety equipment, a trained technician should do the job.
A specialist can also confirm the correct hose size against the vehicle's parts listing. That confirmation matters when the old hose is missing or has been replaced before with an incorrect part.
If water has already entered the cabin, the leak source should be found before a new hose is fitted. Fitting a hose over an active leak elsewhere does not solve the water ingress.
Questions about sunroof drain hose size
What size is a sunroof drain hose?
There is no single sunroof drain hose size, because the correct size depends on the vehicle and the routing. Measure the original hose's inner and outer diameter with calipers and confirm the result against the parts listing for the car.
What size is the sunroof drain tube on a 2000 Honda Accord?
The 2000 Honda Accord sunroof drain tube size should be confirmed from the parts listing for that model and year. If the original tube is still fitted, measure its inner diameter, outer diameter and length to match a replacement.
What size is the sunroof drain hose on an Infiniti G37?
The Infiniti G37 sunroof drain hose size is specific to that model's routing and fittings, so a generic number does not apply. Check the G37 parts listing or measure the old hose before ordering.
What size is the sunroof drain tube on an Infiniti Q50?
The Infiniti Q50 sunroof drain tube size comes from the Q50 parts listing, not from a shared chart. Measuring the existing tube gives a second check on the diameter and length.
How do I measure a sunroof drain tube?
Use calipers to measure the inner diameter and the outer diameter at a clean cut end of the tube. Then measure the routing length with a flexible wire and record all three values in the service notes.
Read next
-
Convertible Roof Hydraulic Fluid Capacity
-
Car Water Leak Repair: A Guide to Sunroofs, Convertible Roofs and Water Ingress
-
Sunroof Drain Cleaning: A Practical Guide to Preventing Water Ingress
-
What Does It Cost to Repair or Replace a Car Sunroof?
-
Convertible Roof Repair and Replacement Costs
-
Choosing a Convertible Roof Repair Kit
-
Convertible Roof Repair: Your Options and How to Find a Specialist
-
Car Roof Repair and Replacement Costs: Sunroofs, Convertibles, and Water Ingress
-
Car Roof Seal Repair and Replacement: How to Stop Roof Leaks and Keep Track of the Work
-
Convertible Roof Maintenance: Caring for Soft Tops and Roof Mechanisms