Tire Size Charts by Rim Diameter
Read a tire size chart by rim diameter, decode the width and aspect ratio, check overall diameter and wheel clearance, and keep the numbers in your service records.
Contents
- How a tire size code reads
- Why charts are split by rim diameter
- Reading a 17 inch rim chart
- What changes on an 18 inch rim
- What changes on a 20 inch rim
- Measure overall diameter yourself
- Check fitment before you buy
- Keep the numbers in service records
- Questions About Tire Size Charts
- Can I fit a 17 inch tire on an 18 inch rim?
- What does the first number in a tire size mean?
- How do I work out overall diameter from a size chart?
- Does a larger rim always mean a larger overall tire?
- What is wheel clearance and why does it matter?
- Should I record tire sizes in my service notes?
A tire size chart by rim diameter groups the tire sizes that fit a given wheel, such as a 17 inch rim or a 20 inch rim, and lists the width and sidewall figures for each. The rim diameter must match the wheel exactly, while the width, aspect ratio and overall diameter decide whether the tire fits the vehicle and clears the bodywork. A chart is a starting point, and the placard on the vehicle remains the reference for the size it was built to take.
- Match the rim diameter in the size code to the wheel before anything else, because a 17 inch tire does not fit an 18 inch rim.
- Use overall diameter and section width to judge fitment and wheel clearance, not the rim size alone.
- Compare the new size with the original size on the vehicle placard so speed and clearance stay predictable.
- Write the size, the date and the odometer reading into your service records at every tire change.
How a tire size code reads
A tire size code such as 225/45R17 carries the section width, the aspect ratio and the rim diameter in one string. The first number is the tire width in millimeters, measured across the sidewall. The second number is the aspect ratio, which is the sidewall height as a percentage of the width.
The letter after the slash gives the construction type, and R means radial. The last number is the rim diameter in inches, and it is the figure a chart by rim diameter sorts on. A size ending in 17 belongs on a 17 inch wheel and nowhere else.
Some sizes add a load index and a speed symbol after the rim diameter. These figures describe how much load the tire carries and how fast it may turn. Record the full string, because two tires with the same width and rim can differ in these ratings.
Why charts are split by rim diameter
A tire size chart by rim diameter exists because the wheel fixes one hard limit in tire fitment. The bead of the tire seats on the rim, so the rim diameter in the code and the wheel diameter must be identical. Sorting sizes by rim diameter removes every tire that physically cannot mount.
Rim width is a separate figure from rim diameter. A wheel of a given diameter comes in several widths, and each width accepts a range of tire widths. A chart that names only the diameter leaves the width check to you.
Charts also separate passenger sizes from light truck sizes, which follow different code styles. A light truck size may read 265/70R17, while a passenger size may read 215/60R17. Both sit under the same 17 inch rim heading but suit different vehicles.
Reading a 17 inch rim chart
A tire size chart 17 inch rim lists sizes such as 205/50R17, 225/45R17 and 235/55R17. The width varies widely within one rim diameter, so the chart helps you see which widths the wheel can take. The aspect ratio then sets how tall the sidewall sits on that width.
Moving from a narrow to a wide tire on the same 17 inch rim changes the overall diameter unless the aspect ratio is adjusted. A wider tire with a lower aspect ratio can keep the diameter close to the original. Check the rim width range for each candidate before you commit.
A 17 inch wheel is often fitted with a taller sidewall than a larger rim on the same vehicle. The taller sidewall gives more cushion, and the smaller wheel leaves more room in the wheel well. Both effects matter when you compare a 17 inch option with an 18 inch or 20 inch one.
What changes on an 18 inch rim
A tire size chart for 18 inch rims follows the same code structure but shifts the balance toward shorter sidewalls. Sizes such as 225/40R18 and 245/45R18 appear here. The aspect ratio tends to drop so the overall diameter stays in the same range as the smaller rim.
A shorter sidewall on an 18 inch rim stiffens the ride and leaves less room between the tire and the wheel arch. The overall diameter must be checked against the original size, because an 18 inch tire that is too tall can rub. Measure the clearance at full steering lock before you accept a new size.
The rim width range for 18 inch wheels covers a spread of tire widths. A wheel that is too narrow for the chosen tire pinches the sidewall, and a wheel that is too wide stretches it. Confirm both the rim diameter and the rim width before mounting.
What changes on a 20 inch rim
A tire size chart for 20 inch rims lists sizes with very short sidewalls, such as 245/35R20 and 275/30R20. The low aspect ratio keeps the overall diameter in range while the wheel grows. Tire width and rim width become the tight constraints at this diameter.
A 20 inch rim leaves little sidewall to absorb road input, so the wheel itself takes more of the load. Tire fitment at this size depends on exact clearance to suspension parts and brake components. A size that fits one vehicle may foul another with the same rim diameter.
The extra wheel mass and the short sidewall affect ride and steering feel. Record the new size and the date in your service notes when you change rim diameter. A written history makes later comparisons and cost tracking far easier.
Measure overall diameter yourself
A tire size measurement chart gives nominal figures, and you can check overall diameter with the numbers you already have. Multiply the section width by the aspect ratio to get the sidewall height in millimeters. Double that height, convert it to inches, and add the rim diameter.
The result is the nominal overall diameter for a new tire at full tread. Tread wear reduces the figure over the life of the tire. Published charts list the nominal value, so treat a measured tire as slightly smaller.
Circumference follows from the diameter, and it sets how far the vehicle travels per wheel turn. A different circumference affects the speedometer reading and the gearing. Keep the new diameter close to the original when you change size.
Check fitment before you buy
Tire fitment is the match between the tire, the wheel and the vehicle, and a chart covers only the tire side. Check the vehicle placard for the size the manufacturer specified. Compare the candidate size with that reference on width, overall diameter and load rating.
Wheel clearance is the space between the tire and the body, suspension and brake parts. Turn the steering to full lock and look at the gap on both sides. A size that clears when parked can still rub under load or during cornering.
A trained tire specialist should confirm any size change that alters the overall diameter or the load rating. Mounting and balancing carry injury risk, and a wrong fitment can damage the vehicle. Use the chart to shortlist, then let a professional verify.
Keep the numbers in service records
A tire size chart answers the fitment question once, and your service records keep that answer available. Write down the full size string, the rim diameter and the date at every change. Add the odometer reading so you can see how far each set traveled.
Record the inflation pressures you run alongside the size. Pressure depends on load and on the vehicle specification, not on the chart. Pairing pressure notes with the size makes future checks faster and catches slow leaks early.
Track the cost of each tire and the associated work in the same place. A running record of size, date, distance and cost turns scattered receipts into a usable history. That history supports decisions when the next set is due.
Questions About Tire Size Charts
Can I fit a 17 inch tire on an 18 inch rim?
No, a 17 inch tire cannot mount on an 18 inch rim because the bead diameter must match the wheel exactly. The last number in the size code gives the rim diameter, and a chart by rim diameter exists to separate these groups. Choose a size from the 18 inch list instead.
What does the first number in a tire size mean?
The first number in a tire size is the section width in millimeters, measured across the tire. A 225/45R17 tire is 225 millimeters wide at its widest point. Tire width interacts with rim width, so check that the wheel accepts the chosen width.
How do I work out overall diameter from a size chart?
Overall diameter comes from the width, the aspect ratio and the rim diameter together. Multiply the width by the aspect ratio, double the result, convert to inches and add the rim diameter. Comparing that figure with the original size shows how much the fitment changes.
Does a larger rim always mean a larger overall tire?
No, a larger rim does not always mean a larger overall tire, because the aspect ratio usually drops to compensate. An 18 inch or 20 inch size can keep the same overall diameter as a 17 inch original. The overall diameter, not the rim diameter, sets the clearance and speedometer effect.
What is wheel clearance and why does it matter?
Wheel clearance is the gap between the tire and nearby body, suspension and brake parts. A tire that is too tall or too wide for that gap can rub and damage components. Check clearance at full steering lock and with the vehicle loaded before accepting a new size.
Should I record tire sizes in my service notes?
Yes, recording the full tire size, the rim diameter, the date and the odometer reading in your service notes pays off later. The record shows what was fitted and when, and it pairs with cost and pressure notes. A clear history makes the next tire decision simpler.