# Tools Needed for an Oil Change

A plain list of the tools and supplies needed for an oil change, from drain pan and socket set to filter wrench, torque wrench, funnel and new oil.

The tools needed for an oil change are a drain pan, a socket set and ratchet, an oil filter removal tool, a funnel, a torque wrench, and rags with gloves. The supplies are new engine oil in the right quantity, a new oil filter, and a new drain plug gasket or crush washer. A way to raise the car safely, such as ramps or jack stands, completes the kit. 

- Match the socket size to your drain plug before you start, because plug sizes differ between vehicles.
- An oil filter wrench must fit the filter body, and the right style depends on the space around the filter.
- A torque wrench lets you tighten the drain plug to the setting the vehicle maker states instead of guessing.
- Replace the drain plug gasket or crush washer with the oil, and check that the new filter matches the old one.
- Store the record of the oil type, filter part number and date with your service notes.
 

## Start with the drain pan and sockets 

An oil drain pan is the first tool to set out, because it catches the used engine oil as it leaves the sump. Choose a pan with enough capacity for the full oil fill and a lip that keeps the stream from splashing. A pan with a sealed spout makes it easier to pour the used oil into a container for recycling. 

A socket set with a ratchet removes and refits the drain plug. Drain plugs come in different sizes, so check the plug head against your sockets before the car is raised. A socket wrench with a longer handle gives you room to break the plug loose without straining. 

Rags and gloves belong with these tools, because used engine oil marks skin and clothing. Nitrile gloves protect your hands, and a stack of rags handles drips around the plug and filter. Keep a container with a lid for the old oil so it can go to a recycling point. 

## Pick the right oil filter removal tool 

An oil filter removal tool grips the filter body so you can turn it without crushing it. The right style depends on the space around the filter and on the filter size. Filter tools appear in several designs, and each one works better on some layouts than others. 

A cap-style filter tool fits over the end of the filter and is driven by a ratchet or wrench. Cap tools are made in sizes that match filter dimensions, so the cap must match your filter. A socket filter tool works the same way but uses a socket fitting on the back. 

A strap wrench wraps a band around the filter and tightens as you turn, which suits filters with little room at the end. A metal strap or a fabric strap both grip the canister, and the handle clears the surrounding parts. Some filters sit deep in a housing, so check access before you buy a tool. 
| Tool style | How it grips | Where it fits | 
| Cap-style tool | Cups the filter end | Filters with clear access at the end | 
| Socket filter tool | Cups the end, driven by a socket | Filters reached with a ratchet extension | 
| Strap wrench | Band tightens around the body | Filters with tight side clearance | 
| Filter pliers | Jaws clamp the canister | Small filters in open space |  

## Supplies to buy before the job 

New engine oil in the quantity your vehicle maker lists is the main supply for an oil change. Check the owner's manual for the oil grade and the fill volume, because both depend on the engine. Buy the full quantity so you are not short at the end of the pour. 

A new oil filter must match the engine, and the part number on the old filter is a reliable reference. Compare the new filter with the old one for thread size, diameter and seal shape before fitting it. The new oil and filter quantity belongs in your service notes for the next change. 

A new drain plug gasket or crush washer seals the plug against the sump. These parts are often sold with the filter, and a used gasket can leak after it is compressed once. Add a funnel to the supplies so the new oil goes into the filler neck without spills. 

## Raise the vehicle safely 

Ramps or jack stands give you room under the vehicle, and the choice depends on the clearance and the job. Ramps suit cars low enough to drive onto them and give stable access to the drain plug. Jack stands hold the raised vehicle while you work, and they need a jack to lift the car first. 

A floor jack lifts the vehicle at the maker's lifting points, which the owner's manual shows. Place jack stands under solid frame points and lower the car onto them before you go underneath. Never rely on a jack alone to hold a vehicle up while you work below it. 

Wheel chocks stop the vehicle from rolling while it is raised. Set them behind the wheels that stay on the ground, and work on a level, solid surface. If you are unsure about lifting points, have a trained technician raise the vehicle. 

## The torque wrench and drain plug setting 

A torque wrench tightens the drain plug to the setting the vehicle maker states. That setting depends on the plug thread and the sump material, so look it up rather than copying a number from another car. An overtightened plug can damage the sump threads, and a loose one can leak. 

Drain plug torque is measured in a unit such as newton meters or pound feet, and the wrench must cover that range. Set the wrench to the stated figure and turn the plug until the wrench signals the setting. Wipe the plug and the sump face clean before you fit the new gasket and the plug. 

Heavy-duty impact wrenches are built for large fasteners and are not the tool for a drain plug. An impact wrench can spin a plug past its setting in an instant. Use hand tools on the drain plug and keep the torque wrench for the final tighten. 

## Wrench sizes and filter fit checks 

Wrench sizes for the drain plug and the filter housing vary by vehicle, so check both before the oil change. A socket that fits the plug head exactly avoids rounding the corners. For a housing with a shaped cap, a matching socket filter tool turns the cover without damage. 

Some vehicles use a cartridge filter inside a housing with a large hex or shaped cap. Those housings need the correct socket or cap tool, and the housing O-ring is replaced with the filter. Check the new filter kit for the O-ring and any seal that comes with it. 

A filter tool kit with several sizes covers more than one vehicle and saves buying each size alone. Store the tools with the socket set so the next oil change starts with everything in one place. Note the sizes that fit your car in your service record. 

## Keep a record of each oil change 

An oil change record starts with the date, the odometer reading and the oil grade used. Add the filter part number and the drain plug gasket type so the next change matches this one. These details make it easy to buy the right supplies without checking the car again. 

Service notes also help you plan the next oil change interval, which the vehicle maker states. Note any leak around the drain plug or filter after the job, because that points to a gasket or torque problem. A short note on the tools used shows what to have ready next time. 

Keep receipts for the oil and filter with the record, and log the cost of each change. [Everyday vehicle costs](/articles/how-to-build-an-annual-car-ownership-budget/) add up, and a written record shows what the maintenance actually takes. Bring the record to a technician if you ever hand the job over. 

## Oil Change Tools Questions 

### What tools are needed for an oil change? 

The core tools for an oil change are a drain pan, a socket set with a ratchet, an oil filter removal tool, a funnel, a torque wrench, and rags with gloves. You also need a safe way to raise the vehicle, such as ramps or jack stands. The supplies are new engine oil, a new oil filter and a new drain plug gasket. 

### What supplies do I need for an oil change? 

The supplies for an oil change are new engine oil in the quantity the maker lists, a matching new oil filter, and a new drain plug gasket or crush washer. A funnel and rags belong with the supplies. Check the owner's manual for the oil grade before you buy. 

### Which oil filter removal tool should I get? 

The oil filter removal tool should match the filter size and the space around it. A cap-style or socket filter tool fits filters with clear access at the end, while a strap wrench suits filters with tight side clearance. A kit with several sizes covers more than one vehicle. 

### Do I need a torque wrench for a car oil change? 

Yes, a torque wrench is the right tool for tightening the drain plug to the setting the vehicle maker states. The correct drain plug torque depends on the plug thread and the sump material. Tightening by feel can damage the threads or leave a leak. 

### Can I use an impact wrench on the drain plug? 

No, an impact wrench is not the tool for a drain plug, because it can spin the plug past its torque setting and damage the sump. Hand tools loosen and tighten the plug, and the torque wrench sets the final tightness. Impact wrenches are built for large fasteners, not small drain plugs. 

### Are parts needed beyond oil and a filter? 

Yes, a new drain plug gasket or crush washer is a part to replace with each oil change. Cartridge filter setups may include a housing O-ring in the filter kit. Check the kit contents before the job so nothing is missing.
