Tow Strap and Recovery Strap Ratings Explained
Learn what tow strap and recovery strap ratings mean, how breaking strength and working load limit differ, and how to compare a strap's load figures.
Contents
- Working load limit versus breaking strength
- Reading a tow strap rating label
- Matching the rating to the recovery
- Questions About Recovery Strap Ratings
- What does a recovery strap rating mean?
- Is a tow rope rating the same as a tow strap rating?
- How do tow strap weight ratings differ from breaking strength?
- What is a working load limit on a recovery strap?
A tow strap or recovery strap rating tells you the load the strap is built to carry and the load at which it is expected to fail. The rating is not one number but two: a working load limit, which is the load the strap should handle in normal recovery use, and a minimum breaking strength, which is the load at which the strap gives way. Reading both figures lets you match the strap to a vehicle and a recovery situation instead of trusting a single claim on the label.
Working load limit versus breaking strength
The working load limit is the load a recovery strap is rated to handle during normal pulls. The minimum breaking strength is the load at which the strap is expected to fail under test. The gap between the two figures is deliberate and reflects a safety margin. A working load limit always sits well below the minimum breaking strength, so the strap is never asked to work at its failure point.
Reading a tow strap rating label
A tow strap rating label should state the strap's rated capacity and its minimum breaking strength in the same units. The rated capacity is the load the maker says the strap can handle, and it is the figure you compare against the weight of the vehicle being recovered. Check whether the label gives a working load limit or only a breaking strength. A strap that lists a breaking strength alone gives you less to work with when you plan a pull.
Matching the rating to the recovery
The weight rating of a strap matters most when you compare it with the load the stuck vehicle places on it. A recovery pull can add resistance from mud, sand or an incline, so the load on the strap can exceed the vehicle's own weight. Choose a strap whose rated capacity leaves room above the weight you expect to move. Where the pull needs a trained recovery specialist, let that person set the gear and the rating.
Questions About Recovery Strap Ratings
What does a recovery strap rating mean?
A recovery strap rating states the load the strap is designed to handle and the load at which it fails. The rating combines a working load limit, the load for normal pulls, with a minimum breaking strength, the failure point. Both figures belong to the same strap and are printed together on the label. A rating without a working load limit tells you only where the strap breaks.
Is a tow rope rating the same as a tow strap rating?
A tow rope rating and a tow strap rating describe the same two load figures, the working load limit and the minimum breaking strength. Rope and strap products differ in construction, but the rating language is shared across recovery gear. Compare the numbers rather than the product name when you check a rope or a strap. The rated capacity on the label is what you match to the vehicle.
How do tow strap weight ratings differ from breaking strength?
Tow strap weight ratings give the load the strap should handle in service, while breaking strength gives the point of failure. The weight rating or rated capacity is the working figure, and it stays below the minimum breaking strength. A strap with a high breaking strength can still have a modest working load limit. Always plan the pull around the working figure, not the failure point.
What is a working load limit on a recovery strap?
A working load limit is the load a recovery strap is rated to carry during ordinary pulls. It sits below the minimum breaking strength, which is the load at which the strap fails. The working load limit is the number you compare with the weight and resistance of the vehicle being recovered. Keep the planned pull within that limit and treat the breaking strength as a margin rather than a target.