What Battery State of Health Means and How It Differs from State of Charge
Learn what battery state of health means, how it differs from state of charge, and how each measure helps you read a service record and track capacity loss.
Contents
- Two Percentages, Two Different Questions
- How State of Health Is Measured
- What Belongs in Your Service Record
- Battery State of Health Questions
- What is state of health of a battery?
- How does battery state of health differ from state of charge?
- Does a low state of charge damage battery health?
- Can state of health be restored to its original value?
Battery state of health describes how much capacity a battery still holds compared with when it was new, while state of charge describes how much energy remains right now. The two numbers answer different questions, and a healthy pack at a low charge is not the same as a worn pack at full charge. Understanding both helps you read service notes and track battery degradation over the life of a vehicle.
Two Percentages, Two Different Questions
State of health (SoH) asks how much usable capacity the pack has left, and state of charge (SoC) asks how full it is at this moment. SoH moves slowly over years as cells age, while SoC changes every trip and every charge session. A battery at 90 percent SoC may sit at a modest SoH, and the two figures never substitute for each other.
How State of Health Is Measured
State of health compares usable capacity with original capacity and reports it as a percentage of rated capacity. A pack holding three quarters of its rated capacity shows an SoH of about 75 percent. Measurement depends on temperature, the test method and how the maker defines rated capacity, so a service record should note those conditions. Capacity loss from battery degradation is gradual, and the reading reflects the pack rather than one day of driving.
What Belongs in Your Service Record
A useful battery record pairs each state of health reading with a date, the odometer value and the test conditions. Notes on charging habits and ambient temperature give the figure context when you compare readings later. State of charge entries matter for daily use, but only SoH shows the long-term trend. Keep both kinds of note separate so degradation is easy to follow.
Battery State of Health Questions
What is state of health of a battery?
State of health is a measure of how much usable capacity a battery has left compared with its original capacity. It is reported as a percentage of rated capacity, so a lower figure means more battery degradation. The value reflects the pack as a whole rather than a single cell reading.
How does battery state of health differ from state of charge?
State of health tracks long-term capacity loss, and state of charge tracks the energy remaining at a given moment. SoH changes over months or years, while SoC rises and falls with every charge and drive. A high state of charge does not mean the pack has kept its original capacity.
Does a low state of charge damage battery health?
A low state of charge alone does not set state of health, because SoH reflects capacity loss rather than the current fill level. Leaving a pack at very low or very high charge for long periods can add stress that affects battery degradation. Follow the vehicle maker's guidance on charge levels for storage.
Can state of health be restored to its original value?
State of health cannot be returned to the original capacity once cells have aged, because the loss is physical. Some test procedures and balancing steps can shift a reading slightly by changing how capacity is estimated. A trained specialist should assess any pack that shows an unexpected drop.